You perform a system reset on your machine by holding the Power and One Cup buttons simultaneously for three seconds while the unit is off. How to Reset Breville Espresso Machine: Post Cleaning is a simple process that clears the internal maintenance counter and resets the flow volume settings to their factory defaults. This procedure ensures your machine recognizes the fresh cleaning cycle and operates with precise water output for your next espresso shot.
Tools for your espresso machine reset

-
A filled water tank: Ensure the reservoir is filled to the “MAX” line with filtered, cold water. This prevents pump cavitation, which occurs when air bubbles enter the system and cause the pump to run dry, potentially burning out the motor during long calibration cycles.
-
A portafilter with a filter basket: You need the standard single-wall or dual-wall filter basket locked into the group head. Without this, the machine lacks the necessary backpressure to sense flow rates, leading to inaccurate pressure readings.
-
A large heat-proof container: Place a vessel that holds at least 20 ounces of water beneath the group head.
-
A steady power supply: Confirm your machine is plugged directly into a wall outlet. Power strips often have internal breakers that trip during the high-wattage heating phase, causing the machine to reset mid-cycle and corrupting your saved settings.
-
The user manual: Keep the specific manual for your model nearby. Button combinations differ between the Barista Express, Pro, and Touch models; pressing the wrong sequence can inadvertently trigger a factory reset, wiping your programmed shot volumes.
If you have lost your paper manual, use the official Breville support documentation to verify your specific button layout. Never use a third-party cleaning tablet not recommended by the manufacturer. Residue from generic tablets can clog the solenoid valve, a repair that often costs a significant amount in professional labor.
Step-by-step
- Turn off the machine completely by pressing the Power button until all lights extinguish.
- Empty the drip tray and verify the water tank is full.
- Hold down the “Power” button and the “One Cup” button at the same time for three seconds until the lights flash.
- Release the buttons once the indicator lights for the selected cup size begin to blink, signaling the machine has entered factory reset mode.
- Press the “One Cup” button again to confirm the reset; the machine will run a short flush cycle to recalibrate the internal flow meter.
- Wait for the machine to return to standby mode, where the Power button light remains steady, indicating the reset is successful.
- Run a single “blank shot” by pressing the One Cup button without coffee to flush any remaining cleaning solution from the group head.
Careful: Don’t interrupt the flashing light sequence by unplugging the unit, as this can corrupt the firmware. Tip: If the lights don’t flash after three seconds, ensure the drip tray is fully inserted, as most sensors prevent the reset if the tray is missing.
Resetting Variables by Model
Different models require unique sequences because they use varied control boards. The following table outlines the general adjustments needed for common machines.
| Machine Model | Reset Activation | Reset Indicator | Note on Calibration |
|---|---|---|---|
| Barista Express | Power + One Cup | Flashing lights | Requires manual volume set |
| Barista Pro | Menu -> Reset | Screen prompt | Factory settings default |
| Barista Touch | Settings -> Reset | Touchscreen confirmation | Resets all drink profiles |
| Oracle Series | Settings -> Reset | Screen confirm | Requires full calibration |
The most common mistake is failing to purge the group head after a factory reset. If you don’t run a blank shot immediately, residual scale or old oils may clog the flow meter, causing your new volume settings to drift within a week.
Use this decision rule to determine if your machine is ready: if the indicator light pulses steadily, the system has accepted the baseline. If the light blinks rapidly or erratically, the memory chip failed to clear. In that case, power cycle the machine and hold the reset command for three additional seconds.
Always start with the factory settings before attempting to adjust your shot volume again. Starting small and adding water volume is safer than overshooting the desired yield, which forces a full reset cycle.
How to tell you did it right

A successful reset is visible when the machine lights return to their default state, usually a solid glow on the power button and the standard blinking pattern for the cup size buttons. If you previously programmed a shot to be very long, it should now return to the factory-standard volume, which is typically around 30ml for a single shot.
A poor result often manifests as the machine refusing to dispense water or the lights continuing to blink rapidly in an error pattern. This happens if the machine fails to communicate with the flow meter during the reset flush. To prevent this, ensure the water tank is firmly seated before you start. If you hear a high-pitched whine but no liquid moves, the pump is likely struggling to prime against an airlock.
If the machine remains in an error state after two attempts, avoid forcing the buttons. Mechanical issues, such as a failing pump or a blocked solenoid, require professional service. The decision rule is simple: if the lights stabilize but the water flow remains inconsistent, descale the unit before seeking repairs. Contact the manufacturer directly if the reset doesn’t clear the error lights, as internal components aren’t user-serviceable. Attempting to open the casing voids your warranty and risks electrical shock.
Operational Standards and Maintenance
The manufacturer’s standard for maintenance requires that you perform a cleaning cycle every 200 shots or when the “Clean Me” light activates. This threshold protects the internal boiler from scale buildup and prevents oils from turning rancid within the group head.
Most users mistakenly wait for the light to turn on, but if you live in an area with hard water, you should trigger the cycle every 150 shots instead. Mineral deposits accumulate faster in high-calcium environments, which can permanently clog the solenoid valve.
Once you have reset the machine, clear all used grounds from the portafilter and wipe the group head gasket with a damp, lint-free cloth. Store your cleaning tablets in a cool, dry place away from direct sunlight to keep them effective for future use.
If you notice the machine failing to reach pressure, it may be time to descale the unit, which is a separate procedure from the post-cleaning reset. Use this decision rule: if the flow is sluggish but the temperature is stable, clean the group head. If the pump sounds strained and the pressure gauge never reaches the green zone, perform a full descale.
Any work involving the internal heating elements or electrical housing must be performed by an authorized technician. Opening the casing can void your warranty and poses a risk of electrical shock. Following these cycles keeps your espresso quality consistent for the life of the machine.
Alternative Reset Methods
Manual Volume Re-Programming
If the full reset isn’t needed, you can manually overwrite the shot volume. Hold the “One Cup” button until the machine starts pumping, then press it again when you reach your desired volume. This saves the new amount as the default for that button without clearing the entire system memory.
Descaling Mode Reset
If the machine is stuck in a descaling loop, you must complete the full descaling process with a solution to clear the sensor. The machine won’t exit this mode until it detects the specific flow pattern of a completed rinse.
Firmware Hard Reset
Some newer touchscreen models allow a hard reset via the hidden service menu. This is usually intended for technicians and involves holding specific buttons while plugging the machine into the outlet. Avoid this unless instructed by official support, as it can clear your custom drink profiles and calibration data permanently.
Frequently asked questions

Can I reset the machine if the “Clean Me” light is still on?
Yes, you can perform a reset while the light is on, but it won’t clear the alert until you run the actual cleaning cycle. The machine tracks the number of shots since the last cycle, and the light is a physical reminder that the hardware needs a chemical flush. Always finish the cleaning cycle before you reset the system, or the machine will continue to track the old, dirty state.
Why is my machine blinking after a reset?
Your machine is likely in its “ready to calibrate” state, which requires you to run a single shot of plain water. This allows the internal flow meter to measure the resistance of the system and lock in the new factory values. Once the water has passed through the group head, the blinking will stop and the machine will return to its standard standby mode.
What happens if I unplug the machine during a reset?
Unplugging the machine during a reset can cause a firmware error, which may leave the unit unresponsive. If this happens, leave the machine unplugged for a few minutes, then try the reset sequence again from the start. If the machine remains unresponsive, it needs to be checked by an authorized service center.
Is it safe to reset the machine every day?
No, you should only reset the machine after you have performed a full cleaning or descaling cycle. Frequent resetting is unnecessary and can cause the machine to lose your saved shot volume preferences. The machine is designed to hold these settings in non-volatile memory, so a simple power outage or daily unplugging won’t require a factory reset.
How long does the reset take?
The manual button reset takes about ten seconds to initiate and another thirty seconds to complete the calibration flush. You don’t need to wait for the machine to cool down before starting, but ensure the water tank has enough liquid to complete the flush without running the pump dry. Running the pump dry can cause air locks in the system, which are difficult to clear.
Final Thoughts
Once the system is refreshed, you’re ready to pull a perfect shot again. Don’t forget to run a quick blank shot through your portafilter to warm up the group head before brewing. It’ll help you get that rich, balanced flavor you love, so you can enjoy your coffee just the way you like it.
1 thought on “How to Reset Breville Espresso Machine: Post Cleaning”